//// Alloy 625 is furnished with one heat treatment for optimum properties up to 1 200 °F (649 °C) and another for optimum properties above 1 200 °F (649 °C). The standard anneal at a minimum of 1 600 °F (871°C) is used for service temperatures up to 1 200 °F (649 °C).
Alloy 625 Grade 1 Corrosion MaterialsAlloy 625 Grade 1 / UNS N06625 / W.NR. 2.4856 Description. Alloy 625 is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix.
Description. Alloy 625 is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a
Alloy 625 sheet, bar and plate - AMS 5599, 5666 - Inconel The nickel-chromium matrix of Inconel® 625 is reinforced by the addition of molybdenum and niobium, which is alloyed through solid solution strengthening, and this allows it to maintain high strength and toughness at temperatures ranging from cryogenic up to 2000°F (1093°C).
DragonPlate Engineered Carbon Fiber Composite Sheets DragonPlate is a leading innovator in high performance carbon fiber-reinforced composites. From custom carbon fiber shapes, to products including tubes, sheets, plates and more, DragonPlate has a solution to fit you.
Distributor of special alloy plates including high temperature alloy, Inconel® and Invar® plates. Available in standard dia. from 3/16 in. to 6-1/2 in. and a variety of metal finishes. Can be used in aerospace, aircraft, architectural, biotech, chemical, food processing, general fabrication, marine, mechanical, packaging and pharmaceutical
High Temperature Alloys:NITRONIC, INCONEL, HASTELLOY(UNS N06625) Ni 61.0, Cr 21.5 Mo 9.0, Nb+Ta 3.6 High strength and toughness from cryogenic temperatures to 1800 degrees F (980 degrees C), good oxidation resistance, exceptional fatigue strength, and good corrosion resistance.
High Temperature Hot Plate at Thomas Scientificand temperature resistance. The chemical properties make the surface very easy to keep clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. Model SB302 has a robust aluminium/silicon alloy top plate.
Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. Characteristics. Excellent mechanical properties at both extremely low and extremely high temperatures.
Inconel 625 Forgings - Inconel 625 High Temp Alloy All Inconel 625 is a corrosion and oxidation-resistant nickel-base alloy. It has outstanding strength and toughness in the temperature range cryogenic to 2000ºF (1090ºC) thanks to the solid solution effects of columbium and molybdenum in a nickel-chromium matrix. Excellent fatigue strength, and stress-corrosion cracking resistance in chloride ions, are further properties of the alloy.
Inconel Alloys, Inconel Sheet, Inconel Plate, Inconel Bar Nickel-based superalloys have been developed for very high temperature applications where relatively high stresses are encountered and where high surface stability is frequently required. Inconel & Inconel Alloys:Inconel 600 , Inconel 601 , Inconel 617 , Inconel 625 , Inconel 718 , Inconel 722 , Inconel 750 , Inconel 800 , Inconel 825
About Inconel 600. Inconel 600 Industrial Nomenclatures:Werkstoff Nr. 2.4816, Inconel 600, Nickelvac 600, Ferrochronin 600, Inco 600, Nickel 600, UNS N06600 Inconel 600 is a typically engineered metallic material that offers outstanding heat, oxidation and corrosion resistance.The highest service temperature of this super alloy goes up to 2000oF and the lowest goes down
Nickel & High Temp AlloysNickel & High Temp Alloys Nickel alloys are metals made from combining nickel as the primary element with another material. It merges two materials to deliver more desirable features, such as higher strength or corrosion-resistance.
Nickel Alloys - Rolled Alloys, Inc.625 alloy is high creep-rupture strength, oxidation resistant to 1800°F (982°C). Excellent resistance to hot seawater, scrubber environments and reducing acids. 718
625 Alloy 600 Alloy 690 17.5 Average corrosion rates for nickel alloys in 10% nitric acid at boiling temperatures. Average Corrosion Rate, mpy 10 8 5 4 2 0 0.6 1 1.8 0.03 Iso-corrosion chart for Alloy 625 in hydrochloric acid. 200 175 150 125 100 77 212 110 100 90 80 70 60 50 40 30 25 Phosphoric Acid, % by Weight Iso-corrosion chart for Alloy INCONEL 625 UNS N06625Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. Characteristics. Excellent mechanical properties at both extremely low and extremely high temperatures.